PAGE 3
Q U A N T U M I N S T A L L A T I O N
1. Fix bracket with the screws
provided
2. Place the chain drive in the
bracket (1)
3. Slide it down until it
clicks (2).
4. Place the tube adapter on the
chain drive. Press the idle end
and lift the blind.
5. Snap it to the bracket.
6. Slide the end caps onto the
brackets.
1. Slide a screw driver between
idle end and bracket and
push the idle end in the chain
drive direction. Slide the end
cap towards you.
2. Move the blind downwards
out of the bracket.
3. Push the pin of the chain
drive and take the chain drive
out of the bracket.
4. Place a screw driver under the
pin of the chain drive and pull it
outwards. Remove chain drive
from the bracket.
REMOVAL - STANDARD ROLLER SYSTEM
INSTALLATION - STANDARD ROLLER SYSTEM
