manualshive.com logo in svg

Quantum QW-400 Series, Инструкция по установке и эксплуатации

Поделиться
Скачать
Quantum QW-400 Series Скачать руководство пользователя страница 8

 

Model QW-400 Vertical Wall Frame 

REGULATORY COMPLIANCE 

This certified Quantum Medical Imaging, LLC medical device has been designed, 
manufactured, and calibrated to comply with governing Federal Regulations 21 CFR 
Subchapter J and the performance standards attendant thereto.  Upon installation, 
all certified products require the filing of Form FD-2579 "Report of Assembly of a 
Diagnostic X-Ray System" by the Assembler (i.e., the installer) with the appropriate 
agencies; the "Installation Quality Assurance Checklist" must also be completed and 
properly distributed upon installation.  A copy of each form (pink copy) is provided 
to the user.  The Installation Report is also completed by the installer and returned 
to Quantum Medical Imaging, LLC. 

Those responsible for the planning of x-ray equipment installations must be thor-
oughly familiar and comply completely with NCRP Report No. 49, "Structural Shield-
ing Design and Evaluation for Medical Use of X-Rays and Gamma Rays of Energies 
up to 10 MeV", as revised or replaced in the future.  Those authorized to operate, 
test, participate in or supervise the operation of the equipment must be thoroughly 
familiar and comply completely with the currently established safe exposure factors 
and procedures described in publications such as Subchapter J of Title 21 of the 
Code of Federal Regulations, "Diagnostic X-Ray Systems and Their Major Compo-
nents," and NCRP Report No. 102, “Medical X-Ray, Electron Beam and Gamma Ray 
Protection for Energies Up to 50 MeV—Equipment Design and Use” as revised or 
replaced in the future. 

Scheduled maintenance is essential to the assurance of continued integrity of this 
equipment with respect to regulatory compliance. The continuance of certified per-
formance to the regulatory standard is incumbent upon the user's diligent confor-
mance to recommended maintenance instructions. 

This product has been classified as Class I, Type B by Underwriters Laboratories, 
Inc.  Equipment not suitable for use in the presence of a flammable anesthetic mix-
ture with air or with oxygen or with nitrous oxide. 

MEDICAL ELECTRICAL EQUIPMENT 

WITH RESPECT TO ELECTRIC SHOCK, FIRE, 

MECHANICAL HAZARDS ONLY 

IN ACCORDANCE WITH CAN/CSA C22.2 NO. 601.1 

98YA 

MEDICAL ELECTRICAL EQUIPMENT 

WITH RESPECT TO ELECTRIC SHOCK, FIRE, 

MECHANICAL HAZARDS ONLY 

IN ACCORDANCE WITH UL 2601-1 

98YA

 

The following symbols may be used for marking on this equipment or equipment 
documentation: 

Safety Notices

 

NOTE 

Form FD-2579 
is required for 
U.S. installa-
tions; please 
observe the 
applicable 
regulations of 
your particular 
local and/or 
national agen-
cies. 

vi 

Earth (ground)

 

 

Type B equipment

 

Protective Earth (ground)

 

 

Attention, consult accompanying documents

 

Содержание QW-400 Series













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды