Quantum Quantum ValueLoader, Руководство пользователя

Страница: 41 / 90

Chapter 2 Operating the ValueLoader
Using Cartridges
ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual 27
2 From the Home screen or main menu, press the
[+]
or
[-]
button until
Commands
appears on the top line of the LCD screen.
3 Press the
[Enter]
button to access the available options.
4 Press the
[+]
or
[-]
button until
Import
appears on the LCD screen.
Press
[Enter]
to select.
5 Press the
[+]
or
[-]
button until the desired slot number appears on the
LCD screen and press the
[Enter]
button. You are not given the option
to import a cartridge to an occupied slot.
6 When
Insert Cartridge Slot
appears on the LCD screen and the Import/
Export slot opens, insert the desired data cartridge into the Import/
Export slot so that the write-protect switch is facing out from the
ValueLoader and towards the left.
7 Repeat steps 5 and 6 as needed for additional cartridges.
8 Press the
[Cancel]
button when you have finished importing
cartridges.
9 Verify that the LCD screen shows that the desired slots have
cartridges installed.
Figure 12 Importing a
Cartridge
Note: If you are using the Operator’s Panel to clean the drive,
import the cleaning cartridge only when the front panel
indicates that cleaning is needed. You may keep a cleaning
cartridge in the ValueLoader if the backup software can
manage the drive cleaning.