Quantum Quantum Atlas 10K II 9.2/18.4/36.7/73.4 GB, Руководство по эксплуатации продукта

Страница: 23 / 371

About This Manual
1-2 Quantum Atlas 10K II Ultra 160/m SCSI Hard Disk Drives
•
LVDS low voltage differential SCSI
•
mA milliamperes
•
MB megabytes (1 MB = 1,000,000 bytes when referring to disk storage and
1,048,576 bytes in all other cases)
•
Mbit/S megabits per second
•
MB/s megabytes per second
•
ms milliseconds
•
MSB most significant bit
•
mv millivolts
•
ns nanoseconds
•
SCSI Small Computer System Interface
•
tpi tracks per inch
• µ
s microseconds
•
V volts
The typographical and naming conventions used in this manual are listed below.
Conventions that are unique to a specific table appear in the notes that follow that
table.
Typographical Conventions:
•
Names of Bits: Bit names are presented in initial capitals. An example is the
Host Software Reset Bit.
•
Commands: Firmware commands are listed as all capitals. An example is
MODE SELECT.
•
Parameters: Parameters are given as initial capitals when spelled out, and are
given as all capitals when abbreviated. Examples are Prefetch Enable (PE) and
Cache Enable (CE).
•
Hexadecimal Notation: The hexadecimal notation is given as in the example
30h, with the “h” indicating hexadecimal.
•
Signal Negation: A signal that is non-active or is in its non-asserted state.
•
Messages: A message that is sent from the drive to the host is listed in all
capitals. An example is BUS DEVICE RESET.
Naming Conventions:
•
Host: In general, the system in which the drive resides is referred to as the host.
•
Computer Voice: This refers to any items that the user types at a computer
keyboard. These items appear in this manual, if applicable, in 10-point, all
capitals, Courier New font. An example is
FORMAT
.