Quantum QT-710, Инструкция по установке и эксплуатации

Страница: 41 / 46

Model QT-710/720 Radiographic Table
OVERVIEW
The Radiographic Table will function reliably when maintained according to the in-
structions provided in this chapter.
WARNING! Only properly trained service personnel should se
WARNING! Only properly trained service personnel should se
WARNING! Only properly trained service personnel should se r-
r-
r-
vice or maintain this equipment. Failure to follow manufa
vice or maintain this equipment. Failure to follow manufa vice or maintain this equipment. Failure to follow manufa
c-
c- c-
turer's or service personnel's recommendations may result in s
turer's or service personnel's recommendations may result in s turer's or service personnel's recommendations may result in s
e-
e- e-
r r r i i i ous injury. ous injury. ous injury.
USER MAINTENANCE
WARNING! Always disconnect the equipment from the main WARNING! Always disconnect the equipment from the main WARNING! Always disconnect the equipment from the main
power supply prior to any cleaning.
power supply prior to any cleaning.
power supply prior to any cleaning.
The equipment user is responsible for the basic cleanliness of the equipment.
On a regular basis, the Radiographic Table’s phenolic top surface should be
wiped clean. Painted metal surfaces should be cleaned using a clean cloth
slightly moistened in warm soapy water (use mild soap). Wipe with a clean wet
cloth.
CAUTION! Never use abrasive polish on this equipment.
CAUTION! Never use abrasive polish on this equipment.
CAUTION! Never use abrasive polish on this equipment.
PLANNED MAINTENANCE
Routine inspection and maintenance of the Radiographic Table should be per-
formed by qualified service personnel on an annual basis.
WARNING! Personnel engaged in maintenance activities should
WARNING! Personnel engaged in maintenance activities should WARNING! Personnel engaged in maintenance activities should
exercise exercise exercise normal caution and care while working with electro normal caution and care while working with electro normal caution and care while working with electro - - -
mechanical equipment. Before removing or opening any electr mechanical equipment. Before removing or opening any electr mechanical equipment. Before removing or opening any electr i- i- i-
cal power panels or covers, verify that the incoming power su
cal power panels or covers, verify that the incoming power su
cal power panels or covers, verify that the incoming power su p-
p-
p-
ply is turned OFF. In the event maintenance procedures require
ply is turned OFF. In the event maintenance procedures require
ply is turned OFF. In the event maintenance procedures require
power to be supplied to the unit, extreme care MUST be exe
power to be supplied to the unit, extreme care MUST be exe power to be supplied to the unit, extreme care MUST be exe
r-
r- r-
cised to insure the safety of service or other personnel in the
cised to insure the safety of service or other personnel in the cised to insure the safety of service or other personnel in the
area. Verify that the equipment is properly grounded before a area. Verify that the equipment is properly grounded before a area. Verify that the equipment is properly grounded before a t- t- t-
tempting any electrical operation.
tempting any electrical operation.
tempting any electrical operation.
29
Chapter 5 Maintenance