8.1 QTTL exposure
QTTL mode uses the exposure system built into the camera. You may
offset exposure by 2 stops above or 3 stops below camera setting.
8.1.1 On Camera
To adjust the exposure press the
SET
button until the
FILL
setting is
highlighted.
Use the
Left (-)
and
Right (+)
buttons to
adjust the exposure up
(brighter) or down (darker).
Advanced feature
To control the exposure of other remote groups, press the
SET
button
until the
RATIO FLASH
setting is highlighted.
Use the soft key located at
the bottom left of the display
to turn on the ratio feature.
Once the ratio flash feature
is turned on you can control
the exposure of remote groups
R1 and R2.
By adjusting R1 and R2 you
can create distinctive and unique
lighting.
To adjust R1 / R2, press the
SET
button until their exposure value is
highlighted, then use the
Left (-)
and
Right (+)
buttons to adjust the
exposure up (brighter) or down (darker).
11
MODE
/OK
SET
+
-
X
– MIT CH4
Q
TTL FILL +0
+0
MODE
/OK
SET
+
-
X
– MIT CH4
Q
TTL FILL +0
ON OFF
OFF
MULTI TTL
FLASH OFF
MODE
/OK
SET
+
-
X
– MIT CH4
Q
TTL FILL +0
R1 QFL +1
R2 QFL -1
ON OFF
ON
MULTI TTL
FLASH OFF
MULTI TTL
FLASH ON