Quantum PX720, Руководство пользователя, Страница: 76 / 259

Chapter 2 Basic Library Operations
Using the OCP (Operator Control Panel)
Quantum PX720 User’s Guide 53
2 Verify that the OCP display indicates “Off-line” from the
Operations
screen.
3 Verify that the CHM (robotic arm) is empty.
If there is a tape cartridge in the CHM, perform a
Move
command to
place the cartridge in an available slot.
4 Turn off the power switch located on the front of the library (see
figure 32 ).
Using the OCP (Operator Control Panel)
The OCP is located on the front of the library. The menus on the OCP
allow you to obtain information about the library, execute library
commands, and test library functions. Before using the OCP to perform
library functions, familiarize yourself with the:
• Home Screen
• OCP Buttons
• Library Status and Attention Messages
Home Screen
2
The first screen the OCP displays after library initialization is the main
screen. This screen displays library status and provides information on
the number of tape drives, slots, and library name (see figure 33 ).