Quantum PX502 Chassis Repacking Instructions
Document 81-81453-02 A01
January 2006
Introduction
3
Introduction
0
This document explains how to repack the Quantum PX502 library. Follow
these instructions carefully to ensure the library is shipped properly.
Note:
All PX500 Series documentation is located on the PX500 Series
Documentation CD included in the library accessory kit.
Caution:
This procedure requires the packing materials originally sent
with the library for proper shipment. If you do not have the
library packing materials, contact Quantum customer support
for replacement packaging
(800) 284-5101
.
This procedure consists of the following steps:
•
Removing the Library from the Rack
•
Installing the Internal Shipping Restraints
•
Packing the Library for Shipment
Removing the Library from the Rack
0
To remove the PX502 library from the rack:
Note:
You must remove all tape cartridges from the library prior to
parking the library robotics for shipment.
1
Using the OCP, open the front doors, remove both tape cartridge
magazines, and remove any tape cartridges from the fixed bins or
FlexLink™ (refer to the
Quantum PX500 Series User’s Guide
PN 81-81290
for information on OCP operation and bin locations).
After removing the tape cartridge magazines and closing the doors, the
library inventories all possible tape cartridge locations (magazines, fixed
slots, Flexlink, and tape drives). This process takes several minutes.
2
From the
Library Operations
screen on the OCP, select
Park for Shipping
.
The library shuts down automatically.
Note:
If there are tape cartridges in the library, the system will NOT
park the library robotics. You must remove all tape cartridges
from the system prior to parking the library robotics.
