Quantum PX500 Series, Руководство пользователя

Страница: 83 / 294

Chapter 2 Basic Library Operations
Using the OCP
Quantum PX500 Series User’s Guide 60
Turning Off the Library
2
To turn off the library:
1 Push the power button located on the front of the library and hold for
approximately 1 second (see figure 35 ).
The library begins the shutdown sequence. The shutdown sequence
can take up to two minutes to complete.
Placing the Library On-
line or Off-line
2
With the library turned on, press the button corresponding to
Ops
on the
OCP to access the
Operations
screen. Select
Library Operations
and then
Library on/offline
to turn the library off-line. Select Yes or No to confirm
the library state change. For more information on the
Operations
screen,
see “Library Operations” on page 68.
Using the OCP
The operator control panel (OCP) is located on the front of the library.
The menus on the OCP allow you to obtain information about the library,
execute library commands, and test library functions. Before using the
OCP to perform library functions, familiarize yourself with the:
• Home Screen
• OCP Buttons
Home Screen
2
The first screen the OCP displays after library initialization is the main
screen. This screen displays library status and provides information on
the number of tape drives, slots, and serial number (see figure 2 ).