Appendix C Installing the PX502 Library
Emergency Library Access
Quantum PX500 Series User’s Guide
226
4
For the network information such as the IP address to be active, you
must reboot the library by holding down the power button located on
).
The library shuts down.
5
Push the power button to start the library.
The PX502 tape library is initially configured and ready for use.
Emergency Library Access
Use the following procedure to gain access to the tape cartridge
magazines in case of an emergency and the library power is not available.
1
Put on an antistatic wrist strap and clip it to the library chassis
(example: a captive screw on the tape drive cover plates).
2
Insert the metal pick included with the accessory kit into the release
holes and trip the magazine door release for both the right and left
magazine doors (see
).
The magazine access doors open.
Caution:
Take standard ESD precautions when performing this
procedure.
Содержание PX500 Series
Страница 280: ...Appendix E Regulatory Statements Notice for USA and CANADA Only Quantum PX500 Series User s Guide 257 5 5 5 5 5 Japanese...
Страница 282: ...Appendix E Regulatory Statements Notice for USA and CANADA Only Quantum PX500 Series User s Guide 259 5 5 5 5 5 Korean...
Страница 284: ...Appendix E Regulatory Statements Notice for USA and CANADA Only Quantum PX500 Series User s Guide 261 5 5 Class 1 5...
Страница 294: ...Index 271 Quantum PX500 Series User s Guide...