ATL P-Series Library User’s Guide Addendum - Prism FC230 Router
6331121-03, Ver. 3, Rel. 2
August 2002
18
Fibre Channel Services Command List
SerialPortBaudRate
Set the baud rate for the FC230 serial
port (2400, 9600, 19200, 38400, 57600,
or 115200).
9600
set serialportbaudrate [rate]
get serialportbaudrate
SerialPortEcho
Enables/disables echoing of
keyboard input.
disabled
set serialportecho [enabled | disabled]
SerialPortHandshak
e
Set the data handshaking method
used for controlling the flow
between the transmitter and
receiver (hardware, software, or
none).
none
set serialporthandshake [hard | xon | none]
get serialporthandshake
SerialPortStopBits
Set the number of stop bits for the
FC230 serial port (1 or 2).
1
set serialportstopbits [1 | 2]
get serialportstopbits
SpeedWrite
Enables/disables the Speed Write
command. Speed Write is designed
to improve the performance of FCP
WRITE commands to SCSI devices
attached to the FC bridge.
disabled
set speedwrite [sb st sl | all] [enabled |
disabled]
get speedwrite [sb st sl | all]
“sb” specifies SCSI bus, “st” specifies SCSI
target, and “sl” specifies SCSI LUN.
SpeedWriteDefault
Sets Speed Write functionality to be
enabled for subsequent SCSI
devices mapped to the FC bridge.
disabled
set speedwritedefault [enabled | disabled]
get speedwritedefault
Temperature
Report the unit temperature in
degrees C.
get temperature
VerboseMode
Sets the Command Line Interface to display extended
information about a parameter when the help command is
given. When verbose mode is enabled, parameter values are
generally preceded by labels in responses to the get
commands. Only the parameter value is output when verbose
mode is disabled.
enabled
set verbose [enabled | disabled]
get verbose
XCDevices
Allows the user to obtain information about the devices used
in a particular Extended Copy command. The Extended Copy
command to query is specified by the CmdNumber for the
command as presented in the SCStatus CLI command. The
‘DeviceType’ field displays the SCSI device type for each
device. The ‘VendorId’, ‘ProductId’, and ‘Serial Number’
fields display the SCSI Inquiry data identifying the device.
Note that the SerialNumber field displays up to 16 of the least
significant digits of the device serial number. the
‘DataDirection’ field specifies whether a device is a data
source, a data destination, or both as specified in the segment
descriptors of an Extended Copy command; the field can take
on the values [Source | Destination | Both].
get XCDevices [CmdNumber]
Command
Description
Default
Syntax