Quantum P7000 Series, Инструкция по распаковке

Страница: 13 / 22

Quantum ATL P7000 Unpacking Instructions
Document 6434006-02, Ver. 2, Rel. 0
August 2002
Unpacking the Library 13
17
Re-insert the right-side wooden bar into its brackets on the pallet
to hold the library in place.
Positioning the
Library
0
To position the library:
1
Map out a route to the installation site.
2
Carefully lift the shipping bag off of the library (see figure 13 ).
Figure 13 Removing the
Shipping Bag
3
Inspect the library for any damage that may have occurred during
shipment.
4
Place the two ramp extensions in the slots provided at the edge of
the pallet (see figure 14 ). The ramp may be set up on either the
right side or the left side of the pallet.
Note:
The following illustrations show the ramp set-up
procedure from the right side of the library.