Quantum ATL P7000 Unpacking Instructions
Document 6434006-02, Ver. 2, Rel. 0
August 2002
22
Unpacking the Library
4
Check the gauge on the level. If the front of the library is level,
. If it is not level:
a
Determine which side of the library is low.
b
Adjust the leveling foot on the low side of the library by
rotating the leveling foot with the open-end wrench.
5
6
Repeat steps
for the left edge, back edge, and right edge of
the library.
7
Recheck the level on all top edges.
8
If necessary, repeat steps
and
until all four top edges of the
library are level.
