Quantum P3000 Series, Руководство пользователя

Страница: 60 / 146

Chapter 2 Basic Library Operations
Manually Ejecting a Tape Cartridge
40 Quantum|ATL P3000 Series User’s Guide
Manually Ejecting a Tape Cartridge
2
DLT Tape Drives
2
To manually eject a tape cartridge from a DLT tape drives:
1
Open one or both of the library front doors:
a
Press the Standby button on the GUI. This places the library
off-line.
b
Verify that the display state display reads System Off-line
and that the robotics has stopped moving. The off-line state
does not take effect until current commands are completed.
c
Take electrostatic discharge precautions as explained in
Taking ESD Precautions on page 16.
d
Using the key from the accessories kit, unlock each door.
e
Lift each door handle straight up and then turn the handle
counterclockwise to unlatch each door.
f
Gently pull on each door handle to open the door.
2
Press the Unload button on the drive (see figure 21 ).
When you press Unload, the tape cartridge rewinds. This may
take between 10 to 120 seconds. When the rewind process is
completed, the Operate Handle indicator comes on.
Figure 21 DLT Tape
Drive Front Bezel
(Example)
Unload button
Insert/release
handle
(shown in up position)