Quantum NDX Series, Руководство пользователя

Страница: 25 / 40

Chapter 3: Initial Setup and System Interface
Control Panel LEDs
Quantum NDX NAS Tower User’s Guide 13
Correcting an Overheat/Fan Fail Condition
1 Check the routing of the cables and move any cables the restrict
airflow.
2
Confirm that all fans are operating normally.
3 Verify that the heatsinks are installed properly.
4
If the chassis cover is not aligned correctly, the airflow may be
disrupted. This leads to overheating. Confirm that the chassis cover
is placed correctly.
5 This LED will remain active as long as the overheat condition exists.