Quantum MC300 Prism, Руководство пользователя

Страница: 35 / 140

Chapter 2 PMC Server Management
Utilities Page
MC300 Prism Management Card User’s Guide 19
1
Access the Utilities Page .
2
Under
Activate New Software Image
, click
Activate
.
A progress bar indicates when the software has been activated.
When complete, a
Results
page displays indicating the
software has been activated.
3
Click
OK
to return to the
Utilities
page.
After completion of the
Activate New Software Image
, the PMC
system uses the new software image the next time the PMC
system is rebooted (see Rebooting the PMC and Library ).
Rebooting the
PMC and Library
2
To utilize updated configuration information, the PMC and library
must be rebooted. To reboot the PMC and library:
To reboot the PMC and library:
1
Access the Utilities Page .
2
Under
Shutdown Prism Management Card,
select
Reboot
and
click
OK
.
The PMC reboots itself, including restarting and initializing the
library. In a multiple frame environment, all libraries will be
restarted and initialized.
Caution:
The activation process takes several minutes. Do
not interrupt the process. Doing so may result in
library failure and damage to the PMC.
Note:
Rebooting the PMC and library may take up to 15
minutes during which time the library is unavailable.
Before rebooting the PMC and library, ensure there
are no active or pending jobs being processed by the
library. It should not be necessary to reboot the PMC
and library during normal operation.