Page 3
1. Remove face place. Connect jumper leads
(provided) to AC input leads in j-box. Fasten j-box
bracket to j-box.
2. Fasten canopy to j-box bracket.
3. Remove hole plug and dress leads through housing
wire channel. Snap exit housing onto canopy.
4. Lay cam locking pin between canopy posts and
snap into retaining hooks. Rotate cam locking pin
up to lock into place.
Back Mount-
2. Remove necessary knockouts and fasten back
plate to j-box.
1. Remove faceplate. Connect installation supply leads
(provided) to AC input leads in j-box. Remove face
plate and back plate from housing.
5. In upper right corner of housing wire channel
connect input leads using pushnuts and jumper
wire provided to route wires to j-box. Connect
battery and snap face plate onto housing. Remote
lamp option: Connect remote lamps to yellow and
blue wires using pushnuts and jumper wire
provided to route wires to j-box.
Top Mount -
Use only Flexible Conduit
with this unit.
Note: Allow Battery to charge
24 hours before initial testing
and 168 hours for full charge.
