FC420 Fibre Channel Bridge Quick Reference Guide
Copyright 2003 by Quantum Corporation. All rights reserved.
Your right to copy this document is limited by copyright law. Making copies or adaptations without prior written authorization of Quantum
Corporation is prohibited by law and constitutes a punishible violation of law.
Quantum Corporation provides this publication “as is” without warranty of any kind, either express or implied, including, but not limited to, the
implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this publication from time to time without
notice.
PN 6473033-03, Ver. 3, Rel. 0
6207947-02sN 1
Step 4: Configure FC420 Bridge Firmware
A command-line interface (CLI) is provided to assist with FC420 bridge configuration, maintenance, and system
diagnostics. Specifically, you can use the CLI to:
•
Configure the Ethernet, Fibre Channel, and SCSI ports
•
Create device maps
•
Obtain FC420 bridge status information
•
Log FC420 bridge events
•
Report SCSI and Fibre Channel device information
For complete configuration instructions, refer to the
FC420 Fibre Channel Bridge Option User’s Guide
(PN 6473031).
Note:
If your library is equipped with an MC300 Prism Management Card, you can change the configuration of
the FC420 bridge, you can do so using the Prism Management Console Web pages (see the
MC300 Prism
Management Card User’s Guide
,
PN 6311631
)
.