Chapter 9: Configuration
System
Quantum DXi6900 User’s Guide
304
Note:
You can select multiple communities to delete at once
Test
The
SNMP Test
page allows you to send a test SNMP trap to verify that SNMP is correctly configured on
the DXi6900.
To access the
SNMP Test
page, on the
SNMP
page, click the
Test
).
Figure 189:
SNMP Test Page
To send a test SNMP trap, select a destination in the list and click
Send
. If the destination does not receive
the SNMP trap, make sure that the destination IP address is correct (see
). Also make sure that the community information is correct (see
).
System
To access the
System
page, click the
Configuration
menu, and then click the
System
tab.
The
System
page contains the following tabs:
l
l
l
l
l
FC Initiators and Targets on page 351
l
