Quantum DXi6900-S, Руководство по обслуживанию на месте

Страница: 191 / 208

Chapter 3: FRU Removal and Replacement Procedures
Additional Removal and Replacement Procedures
Quantum DXi6900-S Field Service Manual 178
Item Description
1 PCIe card holder
2 Release tab
Replacing the PCIe Card Holder
To replace the PCIe card holder:
1. Align the PCIe card holder with the projection on the chassis and push it down until firmly seated (see
Figure 130 on the previous page ).
Removing and Installing the Cable Retention Bracket
To remove and replace the cable retention bracket, refer to the following procedures:
l
Removing the Cable Retention Bracket below
l
Replacing the Cable Retention Bracket on the next page
Removing the Cable Retention Bracket
To remove the cable retention bracket:
1. Remove all cables routed through the cable retention bracket (see Figure 131 on the next page ).
2. Press the tab and slide the cable retention bracket toward the front of the chassis to release it from the
chassis.
3. Lift the cable retention bracket out of the chassis.