Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement
6-68446-01
April 2016
Replacing the DXi690x Array or Expansion Module Rails
15
Installing the DXi690x
Array or Expansion
Module Rack Mounting
Rails
To install the replacement DXi690x Array Module or Expansion Module rack
mounting rails:
1
Position the left and right rail end pieces labeled
FRONT
facing inward, and
orient each end piece to seat in the holes on the front side of the vertical
rack flanges (see
).
2
Align each back end piece in the bottom and top holes of the desired U
spaces.
3
Engage the back end of the rail until it fully seats on the vertical rack flange
and the latch clicks into place. Repeat these actions to position and seat the
front end piece on the vertical rack flange.
Figure 13 Installing the Array
or Expansion Module Rails
Rail front end
Rail back end
Latches click into place in rack flange
(round or square holes)
Latch release button
