![Quantum DXi6700 series Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/quantum/dxi6700-series/dxi6700-series_planning-manual_3762581003.webp)
Installation
3
DXi6700/DXi6701/DXi6702
To use DXi Accent, you must install the Quantum OST Client Plug-in on the media server.
For information about installing the OST Plug-in and using DXi Accent, see the
Symantec
NetBackup OST Configuration Guide
.
Installation
Rack Compatibility
Nearly all standard four-post 19” server racks meeting EIA-310 specifications are
compatible with the DXi6700 rack mount kits. Rack cabinets meeting EIA-310
specifications have an alternating pattern of three holes per rack unit with center-to-
center hole spacing (beginning at the top hole of a 1-U space) of 15.9 mm, 15.9 mm,
and 12.7 mm (0.625 inch, 0.625 inch, and 0.5 inch) for the front and back vertical rails.
For detailed information, refer to the
DXi6700 Installation and Configuration Guide
(6-
67201) or the
DXi6700 Installation and Configuration Guide
(6-67196).
Note:
The rack mounting rails extend to support rack depths from 26.5 to 36.4 inches
(67.3 to 92.4 cm).
When planning your rack installation, be sure to consider leaving room in the rack for
future system expansion. You can expand the storage capacity of the DXi6700 by adding
up to nine expansion modules. Also be sure to leave adequate room behind the rack to
open the rear rack door.
See
Physical Characteristics
on page 16 for node and expansion module rack space
requirements.
DXi6700 Setup and
Configuration
After hardware has been installed and initially configured, you are ready to use your
DXi6700. The remote management console allows you to reconfigure your DXi6700 at
any time.
Required Network Information
To utilize the remote management console of the DXi6700, you must connect it to your
network.
Note the following considerations:
• DHCP (Dynamic Host Configuration Protocol) is not supported.You must provide a
static IP address at the time of installation.
• The default IP Address is:
10.1.1.1
You and other administrative users can always return to the remote management
console to modify all DXi6700 settings, including network settings. Refer to the
DXi6700
User’s Guide
included on the Quick Reference and Documentation CD for additional
information on initially configuring your DXi6700.