Quantum DXi4701, Руководство пользователя

Страница: 370 / 440

Chapter 9: DXi4701 Configuration
Notifications
344 Quantum DXi4701 User’s Guide
An e-mail address is required for sending Configuration data . For
Status data , if you do not enter an e-mail address, the report is sent
to DXiLogger.ScriptData@quantum.com .
3 Click Send .
Viewing Configuration Data
To view a configuration data report:
1 Under Email Type , select Configuration data .
2 Click View .
The System Configuration Report window displays.
3 (Optional) Click Save to save a local copy of the report in TXT
format.
SNMP
The SNMP page allows you to configure the DXi4701 to send status
messages using SNMP (Simple Network Management Protocol). The
DXi4701 supports SNMP v1 and v2c.
SNMP works by sending messages, called protocol data units (PDUs), to
different parts of a network, or communities. SNMP compliant devices,
called agents, store data about themselves in Management Information
Bases (MIBs) and return this data to the SNMP requesters.
You can configure the DXi4701 to act as an agent and send traps to a
specified destination. You can also add SNMP community information.
To access the
SNMP page, on the Notifications page, click the SNMP
tab.
The
SNMP page contains the following tabs:
• Destinations
• Community
• Test
Destinations
The
Destinations
page allows you to manage the destinations the
DXi4701 sends SNMP traps to. You can add, edit, and delete SNMP
destinations, and you can specify the types of traps to send.