Quantum DXi4701, Руководство пользователя

Страница: 331 / 440

Chapter 9: DXi4701 Configuration
System
Quantum DXi4701 User’s Guide 305
Note: Data traffic is allowed for DXi4701 NAS configurations only. For
DXi4701 VTL configurations, data traffic occurs over Fibre
Channel rather than Ethernet.
Note: You can choose to allow any traffic type (management,
replication, or data) on an interface. In this case, the routing of
different traffic types, as well as firewall capability, must be
controlled using the network infrastructure (routers and
switches) that the DXi is connected to.
Configuring the network includes the following major steps:
Note: Before configuring the network, work with your network
administrator to determine the network settings that will be
required to properly integrate the DXi4701 with your
company’s network.
1 Configuring General Network Settings on page 305
2 Configuring Bonding Details on page 307
3 Configuring Interface Details on page 309
4 Configuring Interface IP Addresses on page 309
5 Configuring Interface Routing on page 313
6 Applying Network Settings on page 314
Configuring General Network Settings
Under General , enter the following network information as provided by
your network administrator (see Figure 165 ):
Figure 165 Network Page:
General