Quantum DXi4701, Руководство пользователя

Страница: 278 / 440

Chapter 9: DXi4701 Configuration
Replication Configuration
252 Quantum DXi4701 User’s Guide
Note: For more information about enabling and scheduling
replication for a share or partition, see Replication Send on
page 122.
To add a replication target:
1 Under Target DXis , click Add .
The Add Target Host window displays (see Figure 140 ).
Figure 140 Add Target Host
2 In the Target Hostname or IP box, enter the hostname or IP address
of the system that will receive the replicated data.
Note: When entering IP addresses, never use an address that is in
a reserved IP address range. To see a list of reserved IP
address ranges, click the quick tip icon [?] located near the
IP address field.
Note: To use hostname format, you must specify at least one DNS
IP address on the Network page (see Network on
page 303).
3 In the Encryption drop-down box, select the type of encryption to
use when sending replication data to the target system ( None ,
128-bit , or 256-bit ).
Using 256-bit encryption (default) provides a stronger level of
security but may have an impact on system performance in some
situations. For best performance, if your data network is already
secured, you should select None for encryption.