Quantum DXi4701, Руководство пользователя

Страница: 236 / 440

Chapter 9: DXi4701 Configuration
NAS
210 Quantum DXi4701 User’s Guide
Note: To modify the users that are available in the
Workgroup User list, see Share Access on page 214.
Note: After you add a user or host to the access list, you
cannot change their permissions. Instead, select the
user or host in the access list and click Delete to
remove them from the list. Then add the user or host
again with the correct permissions.
3 (Optional) Under Replication Settings , specify replication settings.
For more information about configuring replication for a share, or
to set up replication for the share at a later time, see DXi4701
Replication on page 113.
4 Click Apply .
Note: If you modify a NAS share that uses the CIFS protocol, you
must restart the CIFS service for the changes to take effect. To
restart the CIFS service, first disjoin the Windows workgroup,
then join it again (see Windows Domain on page 211).
Restarting the CIFS service will close all active connections to
the share. Most Windows workstations will automatically
reconnect, but some applications may be affected.
Deleting a NAS Share
Delete a NAS share if it is no longer needed. When you delete a share, all
data stored on the share is lost, and any schedules associated with the
share are deleted.
Note: If you delete a share configured for Directory/File Based
Replication on the source DXi, the share is not automatically
deleted on the target DXi. If you do not want to retain the
share on the target DXi, you can manually delete it.
To delete a NAS share:
1 Select the share and click Delete .
Note: You can select multiple shares to delete at once.