Quantum DXi4701, Руководство пользователя

Страница: 329 / 440

Chapter 9: DXi4701 Configuration
System
Quantum DXi4701 User’s Guide 303
System
The System page allows you to configure system settings for the
DXi4701, including network settings, system date and time, and security
settings.
To access the
System page, click the Configuration menu, and then
click the System tab.
The System page contains the following tabs:
• Network
• Date & Time
• Security
Network
The Network page allows you to view and change network
configuration information for the DXi4701. The DXi4701 uses this
information to connect to the network.
Network configuration information is entered during initial setup
DXi4701. You should consult your network administrator before making
any changes to the network settings.
Caution: Changing the network configuration requires a system
reboot to allow all system services to function correctly.
Changing the network configuration requires a system
reboot immediately after the changes are applied.
Note: Rebooting the system can take several minutes. After the new
network configuration is saved, close your Web browser and
wait 15 minutes before logging in again. If you change the IP
address that you use to log in to the system, you will
temporarily lose your connection to the remote management
console. Because of this, you might not see a confirmation
page informing you that the new settings have been saved.
To access the Network page, on the System page, click the Network
tab (see Figure 164 ).