Quantum DXi4510, Руководство пользователя

Страница: 40 / 292

Chapter 1: DXi4000 System Description
Network Segmentation
16 Quantum DXi4000 User’s Guide
• ETH2 (Management), BOND ALL-1 (Replication/Data) - All
Management traffic takes place on port ETH2. Data and Replication
traffic take place on ports ETH3, ETH4 and ETH5. Each segment
(Data, Management, and Replication) requires a set of network
settings on the Network page.
• BOND ALL-1 (Data), ETH2 (Replication/Management) - All Data
traffic takes place on ports ETH3, ETH4 and ETH5. Management and
Replication traffic take place on port ETH2. Each segment (Data,
Management, and Replication) requires a set of network settings on
the Network page.
Network Segmentation
Scenarios
The following scenarios provide common examples of network
segmentation.
• Un-Segmented Network
• Data and Replication Separate from Management
• Data and Management Separate from Replication
Un-Segmented Network
This is the most common network configuration (and also the default
setting for DXi4000). In this example, the user has no need to separate
network traffic types. All traffic will occur on a single IP address.
Segmentation and Bonding
page selection:
• Select
BOND ALL (Not segmented)
Data and Replication Separate from Management
In this example, the user has a dedicated low bandwidth wide area
network (WAN) that is used to manage network resources. This network
does not have the capacity for data and replication traffic. Replication is
between two DXi systems that are in the same location with a dedicated
network connection.
Segmentation and Bonding page selection:
• Select ETH2 (Management), ETH3, ETH4, and ETH5 (Replication/
Data)