Quantum DXi4500, Руководство пользователя

Страница: 162 / 226

Chapter 8: DXi4500 Data Services
Source Role Configuration
140 Quantum DXi4500 User’s Guide
The Replication page contains the following tabs:
• Source Role Configuration
• Source Role NAS Directory/File Based Replication
Configuration
• Target Role Configuration
• Target Role NAS Directory/File Target Configuration
• Reports
Source Role Configuration
Use the Source Role page to define the NAS shares that will be
replicated and the target that will receive the replicated data.
Note: You must configure the target system prior to configuring the
source. If the target system is not configured first, you will not
be able to designate the replication target.
Note:
You MUST have at least one NAS share created on the source
before you can configure it for replication.
To configure the source system for replication:
Note: If you need to add, delete, or change a replication target, you
must first pause replication from the Source Role Actions
page. After the replication target has been changed, you must
resume replication from the Source Role Actions page.
1 From the Replication page, click the Source Role tab.
The Source Role General page displays (see Figure 54 ).