Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
Network CLI Commands
105
Listing Network
Interfaces
syscli --list interface [--xml [<filename>]] [--type [configured]|runtime]
This CLI allows the user to list available and configured network interfaces.
CLI command options:
•
--list:
Lists network interfaces.
•
--xml:
List XML output to screen or write XML output to <filename>.
•
--type:
Display interface's configured or runtime values. If this value isn't
specified, the configured values are displayed.
An example output for
--list interface
is shown below:
Output
data:
List
of
Interfaces:
Total
interface
count
=
4
…
[Device
=
3]
Device
Name
=
eth2
Boot
Protocol
=
dhcp
Type
=
Port
Maximum
Speed
=
10GbE
Connection
=
up
State
=
up
Configured
=
true
MTU
=
STD
IP
Properties:
Interface
Name
=
eth2
IP
Address
=
10.20.190.34
Netmask
=
255.255.248.0
Gateway
=
10.20.184.1
ExtHost
=
NO
Routes:
Segments:
Segment
=
ALL
Note:
The
syscli --list interface
command will show the
Boot
Protocol
value as
dhcp
if it was specified, otherwise it will show
static
or
none
.
