Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
60
Scheduler CLI Commands (DEPRECATED)
•
--healthcheck
: Indicates this is a scheduled healthcheck event.
Note:
Healthcheck requires a daily or weekly recurrence not to exceed
every 7 days or once a week.
•
--emailreports
: Indicates this is a scheduled email reports event. This will
send the
--type
to all recipients in the list obtained from syscli
--get
emailhome
.
•
--type
: Specify which report is wanted.
•
--replication
: Indicates this is a scheduled replication event.
•
--name
: Specify a valid VTL or NAS share name.
•
--target
: Target host name or IP of the replication event. If the system or the
share/partition has two targets configured, you must use the
--target
option and you must specify a target IP or hostname. If the system or the
share/partition has no target configured, invoking the commands will result
in error.
•
--start
: Start date and time.
Note:
Date and time can be entered in any order, but if spaces are used to
separate the time and date, then quotes must be used. This date/
time will be used to specify when the event is to occur. In the case
of a recurring event, portions of this date/time will be used for
recurrence. For instance, a yearly recurrence will recur on the same
day and time each year.
•
--end
: End date and time.
Note:
Date and time can be entered in any order, but if spaces are used to
separate the time and date, then quotes must be used. This date/
time will be used to tell when an event will end.
If
--end
is not specified, then an open ended event will be generated.
•
--daily
: Recur daily starting at the time obtained from the
--start
specification.
•
--weekly
: Recur weekly on specified days (comma separated for multiple
days) starting at the time obtained from the
--start
specification.
•
--monthly
: Recur monthly on the day and time obtained from the
--start
specification.
•
--monthday
: Recur monthly on a specific weekday within the month
starting at the time obtained from the
--start
specification. If last is
specified, then the event will occur on the last day of each month.
ex:
2mon
: recur on the second Monday within the month.
•
--yearly
: Recur yearly on the month, day, and time obtained from the
--start
specification.
•
--yearday
: Recur on a specific weekday within the month and starting at the
time, both obtained from the
--start
specification.
ex:
2mon
: recur on the second Monday within the month.
