DLT-V4 Tape Drive Quick Start Guide
4
9 USB/eSATA Tape Drives Only —
Connect the USB or
eSATA cable to the tape drive and to the USB or eSATA
port on your computer (see
figure 8
).
Figure 8 Connecting the Cables
— USB/eSATA Tape Drive
10
Ensure that the power switch on the rear panel of the
tape drive is in the OFF position. Connect the power
cable to the tape drive and plug the power cable in to
the nearest power outlet (see
figure 7
or
figure 8
).
11
Connect the power cables to the host server or
workstation and all peripheral devices.
12
Power on the tape drive and any attached peripheral
devices.
13
Power on the server or workstation and allow its
operating system to start.
N
OTE
:
USB Tape Drives Only —
For optimum
performance, the USB tape drive should be
connected to a USB 2.0 port and be the only
device on the root hub.
Power
cable
eSATA
cable
USB
cable
On
Off
Install EITHER
(not both)
