Quantum Blast Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 24

Quantum Blast Скачать руководство пользователя страница 16

16

BLAST/REV D/OCTOBER 2002

Quantum Blast

Flashing

Bars

Diagnosis

Solution

10 Green

High Battery Voltage

Check Batteries

9 Green

Solenoid Brake Fault

Check Motor/Brake Wiring

8 Green

Possible Controller Fault

See Authorised Pride Provider

7 Yellow

Possible Joystick Fault

See Authorised Pride Provider

6 Yellow

Inhibit Active

Unplug Charger/Check Connections

5 Yellow

Right Motor Wiring Fault

Check Right Motor Wiring

4 Yellow

Right Motor Disconnected

Check Right Motor Wiring

3 Red

Left Motor Wiring Fault

Check Left Motor Wiring

2 Red

Left Motor Disconnected

Check Left Motor Wiring

1 Red

Low Battery Voltage

Check Batteries/Battery Wiring

If you cannot resolve your problem, see your authorised Pride provider.

REMOTE PLUS OPTIONAL FEATURES
See figure 9 to reference the following optional features:

l

Light Key: If your Blast is equipped with the deluxe lighting package, the light key activates the lights.

l

Turn Indicator Keys: The arrow keys activate the turn indicators regardless of whether or not your Blast is powered off
or on.

l

Hazard Warning Key: This key operates the hazard lights.

CONTROLLER FOLDBACK
The Remote Plus controller is equipped with a thermal rollback circuit. This circuit monitors the temperature of the motors and
the controller. In the event that the motors or the controller become excessively hot (above 50C/122F), the controller
reduces the motor voltage. For every degree above 50C/122F, the controller reduces the voltage by 5 volts. This reduces
your Blastís speed and allows the electrical components to cool down. When the temperature returns to a safe level, your
Blast resumes its normal speed.

TROUBLE CODES
In addition to indicating the current state of battery charge, the battery condition meter can also indicate possible problems
with your Blast. The battery condition meter has ten individual bars. The bars provide information by the number of bars that
are flashing. If the meter is flashing rapidly, the controller may be indicating a fault. For instance, the very first red bar flashing
rapidly indicates the battery voltage is nearly depleted. The following is a list of the possible errors signified by the rapidly
flashing meter lights.

REMOTE PLUS CONTROLLER

«
...
14
15
16
17
18
...
»

Содержание Blast

























Отзывы:

Нет отзывов