Quantum ATL PowerStor L200 Series, Руководство пользователя

Страница: 42 / 106

Chapter 2 Installing the Cartridge Tape Library
Operating the Tape Library
26 ATL PowerStor L200 Series Library User’s Guide
Inserting a Cartridge
2
To insert a cartridge into the magazine:
Procedure
1
Open the magazine door:
a
Press Select.
EJECT/UNLOCK?
is displayed.
b
Press Next.
Eject Cartridge?
is displayed.
c
Press Next.
Unlock Door?
is displayed.
d
Press Enter.
Are you sure?
is displayed.
e
Press Enter to answer Yes.
Unlock Doors?
is displayed.
This activity can take up to three minutes. Press any other
button to stop the operation.
f
Open the door using the handle.
Note:
Door Unlocked!
will be always be displayed when the door
is unlocked.
2
Grasp the cartridge with the write-protect switch facing you.
3
Set the write-protect switch to the desired position (see figure 20).
4
Remove the magazine from the library.
Figure 20 Cartridge Write-
Protect Switch
5
Insert the cartridge into the magazine by pushing it into the slot
until it clicks.
A small metal tab holds the cartridge in place.
Caution: Do not press the metal tab by hand.
6
Insert the magazine into the library (see figure 19).
7
Close the magazine door. Push the door until it latches.
Write
Protected
Write
Enabled
Orange
indicator
Write
Protect
Switch