Quantum ATL M2500 Unpacking Instructions
Document 6423000-04 A01
May 2003
10
Removing the Remaining Packing Materials
c
Set the panel aside.
d
Repeat steps
through
on the other side to remove the
left shipping panel.
Figure 7 Removing the
Shipping Panels
Removing the Remaining Packing Materials
0
Now that you have removed the library from its shipping carton,
remove the remaining packing materials from the library:
1
Remove the transit screw from the top of the library and set it aside
(see
Later in this procedure you will place the transit screw in a storage
location within the library in case it is needed for future
repackaging and shipment of the library.
Caution:
The transit screw secures the library robotics. Do not
try to move the library robotics unless this screw and
the two transit screws securing the X-Y tray
(removed later during this procedure) have been
removed; moving the robotics with the transit screws
in place can cause serious damage to the library.
Shipping panels
