QUANTUM ROBOTIC SYSTEMS QBii, Быстрый старт

Страница: 9 / 11

7
7 Powering Up the Robot
With a charged battery in place, press on the upper half of the toggle switch (A). You should
immediately see the following changes:
•
The LED in the upper half of the toggle switch should turn on
•
The third LED on the control board (C) should turn on
•
The voltmeter (D) should indicate the battery voltage
Before proceeding, note the battery voltage. Here are approximate voltage levels corresponding to
different charge levels:
•
Full charge: 12.6V
•
Operating range: 11.0V to 12.6V
•
Depleted battery: 10.2V