Installation and Care Instructions
Synergy Solution
www.pridemobility.com
CLEANING
The Synergy Solution can be easily cleaned. For information on cleaning the
Synergy Solution Single Cover refer to “Cleaning the Optional Single Cover.”
To clean the Synergy Solution:
1. Locate the zipper on the rear side of the outer cover.
See figure 2.
2. Unzip the outer cover and pull out the inner cushion, which is wrapped
in a fluid-resistant cover.
3. Wash the outer cover in a washing machine on the COLD setting.
WARNING! Do not use bleach when washing the outer
cover. Doing so may cause damage to the cover.
4. Spray the inner cover with a disinfectant, then wipe it clean.
WARNING! Never submerge the inner cushion of your
Synergy Solution in water. Doing so may cause damage to
the cushion.
5. Allow both the outer and inner covers to air dry.
WARNING! Do not attempt to put the outer cover in a dryer.
This may cause shrinking.
6. Once both covers are dry, put the inner cushion back inside the outer
cover. Zip the outer cover closed, and place the Synergy Solution back
onto the seat of your chair.
Figure 2. Synergy Solution
OUTER COVER
INNER CUSHION WRAPPED IN
FLUID-RESISTANT COVER
ZIPPER ON REAR SIDE
8
