14
Installation and Care Instructions
Synergy Shape Back
www.quantumrehab.com
Figure 9. Maximum Recline and Precline Angle Adjustment
Recline Angle
The recline angle can be adjusted from -33° to 57°.
To increase the recline angle:
1. Loosen the safety setscrew. See figure 3 or 4.
2. Loosen the positioning screws on the top mounting brackets.
3. Move the mounting pins out.
4. If necessary, loosen the positioning screws on the bottom mounting brackets
and move the mounting pins in. See figure 9. It may be necessary to move the
mounting pins to the front location. See figure 4.
5. Retighten the positioning screws.
6. Retighten the safety setscrew.
To increase the precline angle:
1. Loosen the safety setscrew. See figure 3 or 4.
2. Loosen the positioning screws on the top mounting brackets.
3. Move the mounting pins in.
4. If necessary, loosen the positioning screws on the bottom mounting brackets
and move the mounting pins out. It may be necessary to move the mounting
pins to the back location. See figure 3.
5. Retighten the positioning screws.
6. Retighten the safety setscrew.
WARNING! When adjustments are complete, be sure to
tighten all of the positioning screws and the safety setscrew
if you moved the mounting pins to the front or rear position.
POSITIONING
SCREW
POSITIONING
SCREW
MOUNTING PIN
MOUNTING PIN
MAXIMUM RECLINE
MAXIMUM PRECLINE
-33
57