Quantum Rehab Quantum Vibe, Руководство пользователя

Страница: 25 / 55

Vibe www.quantumrehab.com 25
V I . C O M F O R T A D J U S T M E N T S
To change the controller position:
1. Open the battery door.
2. Unplug the controller. See figure 5.
3. Cut the wire tie(s) that attaches the controller cable to
the armrest.
4. Use a hex key to loosen the setscrew. See figure 15.
5. Slide the controller out of the armrest.
6. Loosen the setscrew in the other armrest.
7. Place the controller in the other armrest.
8. Tighten the setscrew to secure the controller.
9. Use a wire tie to secure the controller cable to the armrest.
10. Plug in the controller to the battery door. See figure 5.
11. Close the battery door.
Swing-away Footrests
Swing-away Footrests enable you to rotate the leg rests to
the side before you transfer on or off your Vibe.
To move the SFRs:
1. Push in the release lever. See figure 16.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two screws from the side of each leg rest
extension. See figure 16.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two screws.
Elevating Leg Rests (Optional)
Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment for the leg angle and a footrest adjustment range
of 12–19 in.
To move the ELRs:
1. Push in release lever A. See figure 17.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B. See figure 17.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two screws from the side of each leg rest
extension. See figure 16.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two screws.
Figure 15. Underside of Armrest
SETSCREW
Figure 16. Swing-Away Footrests
SFR RELEASE LEVER
LEG REST
ADJUSTMENT
SCREWS
RELEASE LEVER B
Figure 17. Elevating Leg Rests
FOOTREST
ADJUSTMENT
SCREWS
RELEASE LEVER A