Quantum Dynamo ATS RevE/May03
www.pridemobility.com
17
Figure 10. Flip-up Armrest Height Adjustment
SUPPORT
BRACKET
ADJUSTMENT
SCREW AND
JAM NUT
FRONT
SHOULDER
BOLT
FLAT
HEAD
SCREWS
COMFORT ADJUSTMENTS
Figure 8. Seatback Angle Adjustment
Figure 9. Flip-up Armrest Angle Adjustment
Turn screw counterclockwise
to tilt armrest upwards
Turn screw clockwise to
tilt armrest downwards
Jam Nut
REMOVE
SCREWS
To change the seat angle:
You can change the seat angle by either raising or lowering the front
posts or the rear posts.
SEATBACK ANGLE ADJUSTMENT
The Versa Seat seatback can be adjusted to various angles for user
comfort. See figure 8.
To adjust the seatback angle:
1.
Use a 1/2-in. socket and a 1/2-in. wrench to remove the screws
from the seatback angle adjustment bracket.
2.
Position the seatback to the desired angle.
3.
Reinstall the hardware.
ARMREST ADJUSTMENT
Flip-up armrests can be both height and angle adjusted to meet the
comfort needs of the user. Removable armrests can also be height
adjusted.
To change the armrest angle for flip-up armrests:
1.
Flip the armrest up and out of the way. See figure 9.
2.
Use a 7/16-in. wrench to loosen the jam nut.
3.
Use a 5/32-in. hex key to loosen the adjustment screw.
4.
Turn the screw clockwise to lower the front of the armrest and
counterclockwise to raise the front of the armrest.
5.
Tighten the jam nut to lock the adjustment screw in place.
To adjust the height of flip-up armrests:
1.
Flip the armrest up and out of the way. See figure 9.
2.
Use a 7/16-in. wrench to loosen the jam nut.
3.
Use a 5/32-in. hex key to loosen and remove the adjustment screw
and jam nut and the two flat head screws from the support bracket.
See figure 10.
4.
Use a 5/16-in. hex key to remove the front shoulder bolt from the
armrest clamp.
5.
Repeat steps 1 through 4 for the opposite armrest.
6.
Raise or lower the armrests to the desired height.
7.
Reinstall and tighten all hardware.
To adjust removable armrest height:
1.
Use a 5/32-in. hex key to remove the two button head screws from
the side of the armrest. See figure 11.
2.
Slide the armrest up or down to the desired height.
3.
Reinstall and tighten the button head screws.
SWING-AWAY LEG REST LENGTH
The swing-away leg rest length can be easily adjusted to a comfortable
position.
To raise or lower the leg rest:
1.
Use a 3/16-in. hex key to remove the two screws on the back of the
leg rest. See figure 12.
2.
Slide the adjustment tube up or down to the desired position.
3.
Reinstall and tighten the screws.
Содержание Quantum Dynamo ATS
Страница 39: ......
