Quantum Networks QN-I-200, Руководство пользователя

Страница: 15 / 27

Local Subnet
Local Subnet is available when AP is in Gateway mode.
Select
Configuration > Local subnet >Add . The Configuration > Local subnet page
appears.
Figure 13: Local Subnet
Parameter Description
Name Type Local Subnet name of your choice.
IP Address Enter an IP address for the gateway. This address can be used to access the
AP's web interface for configuration and monitoring from devices connected to
this subnet.
Subnet Mask Enter the subnet mask for the network.
DNS1 The IP address of the primary Domain Name System (DNS) server.
DNS2 The IP address of the secondary Domain Name System (DNS) server.
MTU Size Default value 1500 bytes
– Client can change the value. Maximum limit 1500
bytes - The maximum transmission Unit (MTU) is the maximum size of a single
data unit of digital communications that can be transmitted over a network.
DHCP Range
Start Enter starting address of DHCP range.( Enter an address in the same subnet
as the Local IP Address)
DHCP Lease
Count Enter the maximum number of clients that can be assigned addresses by
DHCP in this subnet.
Lease Time Set lease time. DHCP server leases an address to a device after every interval
of set time period.
VLAN ID Enter a VLAN ID to segment client traffic arriving from this subnet from other
network traffic.