Quantum Composers 9520 Series Скачать руководство пользователя | Manualshive

Страница: 41 / 81

background image

The Ethernet module used is a Digi Connect ME module supplied by Digi
Connectware, Inc. There are several ways to successfully communicate with the
pulse generator over Ethernet. The two most popular methods are raw TCP/IP
(such as Labview or programming with VISA libraries) and by mapping a pc
COM port using the Digi Connectware s Realport Drivers .

Whatever method of Ethernet communication is ultimately desired, the utilities
supplied by Digi Connectware (included on the cd shipped with the Ethernet-
option pulse generator) will be critical to implementing the communications.
Please install these utilities.

Ethernet communication notes:

The Digi Connectware s Digi Device Discovery can be used to
determine what IP address was assigned by the local DHCP server
(if any).

Digi Device Discovery can also be used to open a web interface to the

Ethernet module. Simply double-click on the IP address that is displayed
in the Digi Device Discovery utility.

o

Username:

root

o

Password:

dbps

If a mapped COM port is the desired communication method, the Digi
Connectware s Realport Drivers setup must be used to install the COM
port on the pc. This virtual COM port is then local to the computer it was
installed on. Please refer to the Digi Connectware documentation
supplied on the cd, or call Quantum Composers technical support.
The pulse generator s SCPI parameter

:SYSTem:COMMunicate:SERial:USB n is defaulted to 115200 and

should not be changed for Ethernet communication, whether or not a
mapped COM port is used. The virtual COM port on the pc should be set
to 115200 BAUD.
Echo functionality is not available on the Ethernet port.

Programming Command Types and Format

The 9520 Pulse Generator uses two types of programming commands: IEEE
488.2 Common Commands and Standard Commands for Programmable
Instruments (SCPI). The format is the same for all interfaces. Hyperterminal (in
Windows) or any other generic terminal program may be used to interactively
test the commands using the RS232 interface. The format of each type is
described in the following paragraphs.

Line Termination

The pulse generator uses text-style line terminations. When a command is sent
to the unit, the firmware is programmed to read characters from a communica-
tion port until it reads the line termination sequence.

«
...
39
40
41
42
43
...
»

Содержание 9520 Series


















































































Отзывы:

Нет отзывов

Похожие инструкции для 9520 Series

Бренд: MCP Страницы: 4

Бренд: RINCO ULTRASONICS AG Страницы: 54

Бренд: A2Z Ozone Страницы: 14

Бренд: Leader Electronics Corp. Страницы: 57

Бренд: Raven Страницы: 80

Бренд: Teledyne Страницы: 126

Бренд: New Holland Страницы: 64

Бренд: Black Diamond Equipment Страницы: 12

Бренд: DUROMAX Страницы: 62

Бренд: DUROMAX Страницы: 64

Бренд: DUROMAX Страницы: 64

Бренд: DUROMAX Страницы: 66

Бренд: Winco Страницы: 40

Бренд: ThalesNano Energy Страницы: 29

Бренд: YORKING Страницы: 39

Бренд: Tarmo Страницы: 49

Бренд: UNI-T Страницы: 91

Бренд: Veichi Страницы: 143

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды