Quantifi Photonics IQTX 1100 Series Скачать руководство пользователя страница 41

Страница: 41 / 75

Coherent Modulation Transmitter | IQTX

Quantifi Photonics Ltd.

Version

1.04

Alternatively, the parameter can also be set to the MIN, MAX or DEF value by clicking the buttons in the

parameter settings panel. In the example below, the POWER has been set to the MAX value of 15 dBm.
To apply the changes, click the tick mark.

10.2.3

Toggling the laser channel on / off

To toggle the laser in a specific channel ON or OFF, click the ON / OFF toggle button.

10.2.4

Setting modulation channel parameters

Clicking the IQABC row in the main display will open the configuration panel of the modulation channels.

Select a channel and set the mode to AUTO or MANUAL.

In manual mode you can set the BIAS value for the channel.

10.2.5

Settings menu

The settings menu is used to configure the IQTX instrument settings and unit preferences. These
controls can be accessed by clicking the settings button on the right-hand bottom corner.

The tick mark MUST be clicked in order for any changes or values that were entered to be

applied successfully.

After toggling the laser channel from OFF to ON, the IQTX instrument will take up to 30

seconds to stabilise its power and frequency.

Содержание IQTX 1100 Series












































































Результаты поиска

Содержание IQTX 1100 Series

Отзывы:

Бренды по названию

Популярные бренды

Quantifi Photonics IQTX 1100 Series, Руководство пользователя

Результаты поиска

Содержание IQTX 1100 Series

Отзывы:

Бренды по названию

Популярные бренды