QUANTA STRATOS S210 Series S210-X2A2J, Техническое руководство

Страница: 195 / 262

BMC C
ONFIGURATION
G
ROUP
4-
29
Procedure:
1. Select the
LAN Interface
from the drop down list.
2. Check
Enable
to enable the LAN Settings.
3. In IPv4 Configuration, enable
Use DHCP to Obtain an IP
address automatically
to dynamically configure IPv4
address using DHCP.
4. If the field is disabled, enter the
IPv4 Address
,
Subnet
Mask
and
Default Gateway
in the respective fields.
5. In IPv6 Configuration, if you wish to enable the IPv6 set-
tings, check
Enable
.
IPv6 Configuration
This option lists the following IPv6 configuration
settings.

IPv6 Settings: This option is to enable the
IPv6 settings in the device.

Obtain an IPv6 address automatically: This
option is to dynamically configure IPv6
address using DHCP (Dynamic Host Config-
uration Protocol).

IPv6 Address: To specify a static IPv6
address to be configured to the device. Eg:
2004:2010

Subnet Prefix length: To specify the subnet
prefix length for the IPv6 settings.
Note:
Value ranges from 0 to 128.

Default Gateway: Specify v6 default gateway
for the IPv6 settings.
Network Settings Page (Continued)
I
TEM
D
ESCRIPTION
VLAN Configuration
It lists the VLAN configuration settings.

VLAN Settings: To enable/disable the VLAN
support for selected interface.

VLAN ID: The Identification for VLAN config-
uration.

Value ranges from 1 to 4095.

VLAN Priority: The priority for VLAN configu-
ration.

Value ranges from 1 to 7.

7 is the highest priority for VLAN.
Save To save the entries.
Reset To Reset the modified changes.
Network Settings Page (Continued)
I
TEM
D
ESCRIPTION