manualshive.com logo in svg

QUANTA STRATOS S210 Series S210-X22RQ, Техническое руководство, Страница: 185 / 252

Поделиться
Скачать
QUANTA STRATOS S210 Series S210-X22RQ Скачать руководство пользователя страница 185

C

HAPTER

 T

ITLE

W

EB

 G

RAPHICAL

 U

SER

 I

NTERFACE

 (GUI) 

FOR

 ESMS

 

4-33

PEF

Platform Event Filtering (PEF) provides a mechanism for con-
figuring the BMC to take selected actions on event messages 
that it receives or has internally generated. These actions 
include operations such as system power-off, system reset, as 
well as triggering the generation of an alert. In MegaRAC GUI, 
the PEF Management is used to configure the following fea-
tures:

Event Filter

Alert Policy

LAN Destination

To open PEF Management Settings page, click 

Configurations 

> PEF

 from the main menu. A sample screenshot of PEF Man-

agement Settings Page is shown in the screen shot below 
along with an explanation of each of the tabs.

Event Filter Tab

A PEF implementation is recommended to provide at least 16 
entries in the event filter table. A subset of these entries should 
be pre-configured for common system failure events, such as 
over-temperature, power system failure, fan failure events, etc. 
Remaining entries can be made available for ‘OEM’ or System 
Management Software configured events. Note that individual 
entries can be tagged as being reserved for system use - so 

this ratio of pre-configured entries to run-time configurable 
entries can be reallocated if necessary.

Figure 4-24. PEF Management – Event Filter

The fields of PEF Management – Event Filter Tab are explained 
below.

This page contains the list of configured PEF’s.

Table 4-24: PET Management - Event Filter

I

TEM

D

ESCRIPTION

PEF ID

This field displays the ID for the newly 
configured PEF entry (read-only).

Filter configuration

Check box to enable the PEF settings.

Event Filter Action

Check box to enable PEF Alert action. This is a 
mandatory field.

Event Severity

To choose any one of the Event severity from the 
list.

Содержание STRATOS S210 Series S210-X22RQ





























































































































































































































































Отзывы:

Нет отзывов