QUANTA STRATOS S210 Series S210-X12RS, Руководство пользователя

Страница: 34 / 43

S
AFETY
I
NFORMATION
S
YSTEM
A
CCESS
W
ARNINGS
3
-4
Power Cord Warnings
If an AC power cord was not provided with your product, pur-
chase one that is approved for use in your country.
System Access Warnings
CAUTION!
T
O AVOID ELECTRICAL SHOCK OR FIRE
,
CHECK THE POWER
CORD
(
S
)
THAT WILL BE USED WITH THE PRODUCT AS FOLLOWS
:

Do not attempt to modify or use the AC power cord(s) if
they are not the exact type required to fit into the grounded
electrical outlets.

The power cord(s) must meet the following criteria:
The power cord must have an electrical rating that is greater
than that of the electrical current rating marked on the
product.
CAUTION!
T
HE POWER CORD MUST HAVE SAFETY GROUND PIN OR CONTACT
THAT IS SUITABLE FOR THE ELECTRICAL OUTLET
.
CAUTION!
T
HE POWER SUPPLY CORD
(
S
)
IS
/
ARE THE MAIN DISCONNECT
DEVICE TO
AC
POWER
. T
HE SOCKET OUTLET
(
S
)
MUST BE NEAR
THE EQUIPMENT AND READILY ACCESSIBLE FOR DISCONNECTION
.
CAUTION!
T
HE POWER SUPPLY CORD
(
S
)
MUST BE PLUGGED INTO SOCKET
-
OUTLET
(
S
)
THAT IS
/
ARE PROVIDED WITH A SUITABLE EARTH
GROUND
.
!
!
!
!
CAUTION!
T
O AVOID PERSONAL INJURY OR PROPERTY DAMAGE
,
THE
FOLLOWING SAFETY INSTRUCTIONS APPLY WHENEVER ACCESSING
THE INSIDE OF THE PRODUCT
:

Turn off all peripheral devices connected to this product.

Turn off the system by pressing the power button to off.

Disconnect the AC power by unplugging all AC power
cords from the system or wall outlet.

Disconnect all cables and telecommunication lines that are
connected to the system.

Retain all screws or other fasteners when removing
access cover(s). Upon completion of accessing inside the
product, refasten access cover with original screws or
fasteners.

Do not access the inside of the power supply. There are no
serviceable parts in the power supply. Return to
manufacturer for servicing.

Power down the server and disconnect all power cords
before adding or replacing any non hot-plug component.
When replacing a hot-plug power supply, unplug the power
cord to the power supply being replaced before removing the
power supply from the server.
CAUTION!
I
F THE SERVER HAS BEEN RUNNING
,
ANY INSTALLED
PROCESSOR
(
S
)
AND HEAT SINK
(
S
)
MAY BE HOT
.
!
!