QUANTA S200-X12TS, Руководство пользователя, Страница: 33 / 52

A
BOUT THE
S
ERVER
LED S
TATUS
D
EFINITIONS
1-24
Slot Empty
By Expabder
control
The slot is empty, an unsupported disk
is present, the disk has been spun
down for removal (Ready for
Removal), or a new disk has been
inserted (the disk PHY not ready), and
the state has not been updated by the
storage controller
Off Off Off
Note:

The LED pattern follows the DCS LED pattern spec. design.

The LED pattern only for LSI 9260-8i and MegaRAID card.

LSI 9210-8i and SAS2008, SAS2308 mezzanine cards do not fault LED, only Simple LED mode.

The Rebuild LED Will over write the RAID failed LED pattern.

If using Standard SAS HDD, the HDD Active LED by Reverse

Normal (Standby ) state the Green LED still on,

HDD access the LED blanking.
2.5” HDD SKU Expander LED Mode (2.5” x10 SKU)
E
XPANDER
LED P
ATTERN
S
LOT
/D
EVICE
S
TATES
(RAID S
TATES
) HDD A
CCESS
I
DENTIFICAITON
SES-2
C
OMMAND
S
LOT
/D
EVICE
S
TATES
(RAID S
TATES
)
S
TATUS
LED
(G
REEN
)
F
AULT
LED
(R
ED
)
A
CTIVE
LED (D
EEP
G
REEN
)