Quanta Computer Inc.
Model
K71
Web Camera
CMOS Sensor
5M, auto-focused
CQEx+ Up-Down Tilt
Output image format: H.264, MJPG, YUV
Frame rate: 30fps
Audio
TI AIC3262
Speaker
Stereo Loudspeakers: 5W/5W (Left/Right)
Internal Mic
Analog x1
Main Battery
ML Lithium Rechargeable Battery
Nominal Capacity
:
335 mAh
Nominal Voltage
:
3.7V
Watt-hour
:
1.23 W/hr
Chemical System
:
Lithium Cobalt Dioxide / Chain Carbonate
Power cord
Embedded; 19V/1.58A
Button/Switch
Power Switch x1 with blue LED on rear I/O
Wake-up key with capacitive switch on front panel
Volume key (up/down) with capacitive switch on front panel
Operating System
Android 4.1.1 (Jelly Bean)
In-box Accessory
Cleaning cloth x1, Size: 170x145mm, Black color
Power cord x1, Size: 1.8m, White color
Operating temp
0
℃
~40
℃
Storage temp
-20
℃
~70
℃
Regulation
RoHS, WEEE
Safety
CE/FCC/UL
Sleep mode power
consumption
TBD(0.5W)
Full mode power
consumption
TBD(30W)
Power off mode
power consumption
0.5W
Max power
TBD
K71 device Safety statement
CE Marking
This device has been tested to and conforms to the regulatory requirements of the European Union and
has attained CE Marking. The CE Mark is a conformity marking consisting of the letters “CE”. The CE
Mark applies to products regulated by certain European health, safety and environmental protection
legislation. The CE Mark is obligatory for products it applies to: the manufacturer affixes the marking in
order to be allowed to sell his product in the European market.
This product conforms to the essential requirements of the R&TTE directive 1999/5/EC in order to attain
CE Marking.
The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a
product. Secondly, CE Marking is mandatory for the product it applies to, whereas most quality markings
are voluntary.
Marking: The product shall bear the CE mark.
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.