SAFETYTRAINING
INFORMATION
Your
radio
generates
RF
electromagnetic
energy
during
transmit
mode.
This
radio
is
designed
for
and
classified
as
“Occupational
Use
Only”,
meaning
it
must
be
used
only
during
the
course
of
employment
by
individuals
aware
of
the
hazards,
and
the
ways
to
minimize
such
hazards.
This
radio
is
NOT
intended
for
use
by
the
“General
Population”
in
an
uncontrolled
environment.
This
radio
has
been
tested
and
complies
with
the
FCC
RF
exposure
limits
for
“Occupational
Use
Only”.
In
addition,
your
radio
complies
with
the
following
Standards
and
Guidelines
with
regard
to
RF
energy
and
electromagnetic
energy
levels
and
evaluation
of
such
levels
for
exposure
to
humans:
FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to
Radio Frequency Electromagnetic Fields.
American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure
to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially
Hazardous Electromagnetic Fields– RF and Microwave.
T
he
information
listed
above
provides
the
user
with
the
information
needed
to
make
him
or
her
aware
of
RF
exposure,
and
what
to
do
to
as
‐
sure
that
this
radio
operates
with
the
FCC
RF
exposure
limits
of
this
radio.
Electromagnetic
Interference/Compatibility
During
transmissions,
your
radio
generates
RF
energy
that
can
possibly
cause
interference
with
other
devices
or
systems.
To
avoid
such
interference,
turn
off
the
radio
in
areas
where
signs
are
posted
to
do
so.
DO
NOT
operate
the
transmitter
in
areas
that
are
sensitive
to
electromagnetic
radiation
such
as
hospitals,
aircraft,
and
blasting
sites.
Occupational/Controlled
Use
The
radio
transmitter
is
used
in
situations
in
which
persons
are
exposed
as
consequence
of
their
employment
provided
those
persons
are
fully
aware
of
the
potential
for
exposure
and
can
exercise
control
over
their
exposure.
Attention:
This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure emvironment
at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning
lable is affixed to all units. In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be
maintained when held-to-face, and body-worn operations are restricted to the approved original acessories (belt clip).
Do not use this device when antenna shows obvious damages
Fujian Nanan Quansheng Electronics Co.,Ltd.
Fujian Nanan Quansheng Electronics Co.,Ltd.
Fujian Nanan Quansheng Electronics Co.,Ltd.
Only the headset reported in test report can be used.
Содержание TG-K88mini
