FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION(The following description is without
voice prompt.)
PTT ID Prolong Time(PTT-LT)——Menu No.20
1. In frequency or channel mode,press Menu+20, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
(There are 0-30ms to choose)
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
This function is to set the prolong time of sending the radio’s PTT-ID.
The operation steps are as follows:
!
NOTE
Select“0”in normal use to avoid affecting the radio.
⊙
!
NOTE
Channel name must be set
by program software. It can
edit any three numbers or
characters.
⊙
A Channel Display Mode(MDF-A)——Menu No.21
1. In standby mode press Menu+21, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
Display modes:① FREQ:Fre Channel No.
② CH: Channel No.
③ NAME:Channel Name
3. After setting, press key Menu to confirm, and then press key
PTT or Exit to standby.
This function is to set the display mode of channel A.
The operation steps are as follows:
FUNCTION OPERATION AND DESCRIPTION(The following description is without
voice prompt.)
B Channel Display Mode(MDF-B)——Menu No.22
1. In standby mode, press Menu+22, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
Display modes: ① FREQ:Fre Channel No.
② CH:CH:
③ NAME:Channel Name
3. After setting, press key Menu to confirm,and then press key PTT
or Exit to standby.
This function is to set the display mode of channel B.
The operation steps are as follows:
!
NOTE
Channel name must be set
by program software. It can
edit any three numbers or
characters.
⊙
Busy Channel Lock(BCL)——Menu No.23
1. In standby mode, press Menu+23, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
ON:ON OFF: OFF
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
When this function is on, it may prevent other radios’interference. If the selected channel or
frequency is being used by other radios, when you press key PTT, the radio you use can not transmit,
It can transmit only when the station can not receive any signals.
The operation steps are as follows:
PTT-LT
0
20
20
PTT-LT
1
MDF-A
FREQ
21
MDF-A
CH
21
ABC
136.225
4
400.875
136.225
3
4
CH-OO3
136.225
4
MDF-B
FREQ
22
22
MDF-B
CH
400.875
136.225
3
4
400.875
CH-004
3
400.875
ABC
3
BCL
OFF
23
BCL
ON
23
33
34
Содержание TG-45UV
Страница 1: ...USER S MANUAL...